Changing The Default Settings - Denso BHT-805BW Operator's Manual

Changing the Default Settings

The volume, vibrator, LCD display brightness and power save settings can be
changed at the MENU screen.
Item
Used to set the volume of the speaker that notifies
the user when barcode scanning is complete.
VOLUME
The volume can be adjusted in 4 levels: Hi, Lo, Mid
and Mute.
Used to turn the vibrator that notifies the user
VIBRATOR
ON/OFF when barcode scanning is complete.
Used to set the backlight brightness of the LCD
display.
BRIGHTNESS
The brightness can be adjusted in 5 levels.
Used to set the backlight brightness of the LCD
BRIGHTNESS
display during power save mode.
(PS)
The brightness can be adjusted in 6 levels.
Used to set the time until the LCD display backlight is
POWER SAVE
dimmed when not in use in order to save power.
Procedure
1
Hold down magic key M1
for at least 1 second.
Details
The MENU screen displays.
20
Setting
Mute Lo Mid Hi
ON, OFF
Levels 1 to 5
Levels 0 to 5
1-second units
(max. 30 seconds)