Table of Contents
Advertisement
Charging with the communication unit (CU-801, CU-811, CU-821)
or battery charger (CH-851)
1
Slide the battery cartridge cover
release button (1) in the direction
indicated by the arrow and remove
the battery cartridge cover (2).
2
Check
the
terminals and indication on the BHT
unit, and then insert the cartridge in
the direction indicated by the arrow.
Point
Do not use battery cartridges other than
those specified by DENSO WAVE.
3
Insert the battery cartridge cover tab
(1), and then close the battery
cartridge cover (2) to lock the cover
in position. Press the battery cover
into place until a click is heard.
4
Connect the dedicated AC adapter
to the DC input connector on the
charger and plug the adapter into
the wall socket.
Note:
Power for the CU-821 can be obtained from a USB connection port (host computer or
hub), however, charging is not possible while the host computer is in suspend mode.
Charging is resumed when suspend mode is exited. This can be avoided using a
dedicated AC adapter to supply power. Suspend mode is a power saving function used
to temporarily put the computer on standby when not in use.
battery
cartridge
The charger Power LED
(green) turns ON.
11
Step 1 Charging
Hide quick links:
Advertisement
Table of Contents
