Garmin G3X Touch Installation Manual page 737

Hide thumbs Also See for G3X Touch:

Table of Contents

A setting that allows switching the NMEA output between "Normal" and "Fast" speeds is accessed by

pressing the MENU Key on the Comm Page (at least one output must be set to NMEA Out) which enables

a Configure NMEA Output button to appear.

Pressing this button displays a pop-up window which allows the selection of the Lat/Lon format and the

output rate. These settings affect all RS-232 ports that are configured to output NMEA data. The selected

speed is displayed following the baud rate now for all ports configured for NMEA output. This feature is

useful for sending data to devices that require the full set of NMEA sentences at a slower pace.

Fast (every second): GPBOD, GPRMB, GPRMC, PGRMH, PGRMZ

Normal (every two seconds): GPAPB, GPBOD, BPBWC, GPGGA, GPGLL, GPGSA, GPGSV,GPRMB,

GPRMC, GPRTE, GPVTG, GPWPL, GPXTE, PGRME, PGRMH, PGRMM, PGRMZ

190-01115-01

G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout

Troubleshooting