Adahrs Unit Orientation - Garmin G3X Touch Installation Manual

The ADAHRS Configuration Page status boxes referred to in
following figure.

33.4.3.1 ADAHRS UNIT ORIENTATION

1. Enter configuration mode by holding down the left-hand softkey while powering on the PFD 1
display.
2. Use the FMS Joystick to select the ADAHRS Page.
3. Use the FMS Joystick to select which ADAHRS (1, 2, or 3) is being configured.
4. Use the FMS Joystick to select Unit Orientation and press the ENT key.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC
Table 33-2 and Table 33-3 are shown in the
Page 33-10