Garmin G3X Touch Installation Manual page 527

Pitch Servo
1. Use the AUTOPILOT SETUP page to adjust the PITCH SERVO gain setting
a) Engage the autopilot in ROL/PIT mode with the aircraft approximately level
i. With no GMC 30X Controller:
ii. With a GMC 30X Controller:
b) Press MENU two times on the GDU to enter the MAIN MENU page.
c) Select the SYSTEM SETUP page.
d) Select the AUTOPILOT page.
e) Select PITCH SERVO page and highlight the SERVO GAIN entry.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC
1.Press, hold, and release the CWS/DISCONNECT button to engage the AP
1.Press the AP button on the GMC 30X to engage the AP
2.Press the YD button on the GMC 30X to DISENGAGE the YD
Page 33-57