Color Temperature/Preset White Balance - Canon EOS C200 Instruction Manual

White Balance
Å
4 Press the button.
• The Å A or Å B icon will flash quickly.
• Make sure the gray card or white object fills the screen until the procedure is completed.
• Once the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the
78
camera.
• The selected color temperature/color compensation (CC) value will be set and will appear on the screen
next to the white balance icon.
NOTES NOTES
• Readjust the custom white balance if the light source or ND filter setting changes.
• Very rarely and depending on the light source, Å may keep flashing (it will change to a slow flashing). The
result will still be better than with the auto white balance.
• After the camera registers a custom white balance the color temperature or CC value may appear in gray. This
indicates that the value registered exceeds the range of values that can be displayed but the white balance is
correctly calibrated and you can continue shooting.

Color Temperature/Preset White Balance

1 Press the WB button.
• The white balance mode icon will be highlighted in orange.
• You can also use the FUNC button and joystick to enter the direct setting mode.
2 Push the joystick up/down to select the
temperature setting).
• Press the joystick to set the preset setting or the default color temperature. To fine-tune the preset white
balance settings or change the color temperature, continue the procedure instead of pressing the joystick.
Å
3 Press the button.
• You can also press the FUNC button or push the joystick right.
• The color temperature will be highlighted in orange. To adjust the color compensation (CC) value, push the
joystick right again.
4 Push the joystick up/down to change the color temperature/color compensation (CC) value and then
press the joystick.
• The selected color temperature/color compensation (CC) value will be set and will appear on the screen
next to the white balance icon.
Adjustment ranges
White balance mode/setting
¼
(daylight)
É
(incandescent lamp)
È
(set color temperature)
¼ É
or icon (preset white balance), or the
Adjustment range
Color temperature (K) Color compensation (CC) value
4,300 K to 8,000 K
2,700 K to 3,700 K
2,000 K to 15,000 K
–5 to +5
–20 to +20
È
icon (color