Table of Contents
Advertisement
Clip Operations
Clip Operations
Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip
information. This is done through the clip menu, which contains different functions depending on the index
136
screen. Refer to the following table for available functions and refer to the following pages for more details of the
functions.
Operating modes:
Clip Menu Functions
Menu item
[Cancel]
[Display Clip Info]
1
[Recover Clip]
[Delete Clip]
2
[FTP Transfer]
1
Appears only when a clip requires recovery. In such case, only [Cancel], [Recover Clip] and [Delete Clip] will appear in the menu.
2
MP4 clips only.
Using the Clip Menu
1 Select a clip and then press the joystick.
• The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press the joystick.
• The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
• Press the CANCEL button instead to return to the clip index screen.
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• To perform operations on MP4 clips recorded on an SD card, make sure the LOCK switch on the SD card is
not set to prevent writing.
Closes the clip menu.
Displays the clip information screen.
Recovers a clip.
Deletes a clip.
Transfers clips using the FTP protocol.
Description
A
–
137
52
137
168
Advertisement
Table of Contents
