Table of Contents
Advertisement
Using the Fan
The camera uses an internal cooling fan to reduce the camera's internal heat. In
the fan's operation mode and speed. In
Setting the Fan's Operation in
Operating modes:
1 Open the fan's [Mode] submenu.
> [B % System Setup] > [Fan] > [Mode]
2 Select the desired option and then press the joystick
• If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Always On], continue
the procedure to set the fan speed.
3 Open the [Fan Speed (Always)] submenu.
> [B % System Setup] > [Fan] > [Fan Speed (Always)]
4 Select the desired fan speed and then press the joystick.
Options
[Automatic]:
The fan runs while the camera is not recording and is automatically turned off while the camera
is recording. However, if the internal temperature of the camera is too high (b appears in red),
the fan will be activated automatically (in that case, ` will appear next to the b icon). When
the camera's temperature has decreased sufficiently, the fan will be turned off. Use this setting
when you do not want the camera to pick up the fan's operating sound.
[Always On]:
The fan runs at all times.
Setting the Fan Speed in
Operating modes:
1 Open the [Fan Speed] submenu.
> [B $ System Setup] > [Fan Speed]
2 Select the desired fan speed and then press the joystick.
IMPORTANT
• While the fan is running, the exhaust vent will emit warm air.
• Be careful not to obstruct in any way the fan's air vents (A 12, 13).
NOTES
NOTES
• Depending on the ambient temperature and other shooting conditions, the fan may not turn off even if you set
its operating mode to [Automatic].
mode, the fan runs at all times but you can select its speed.
Mode
Mode
Recording Video
mode, you can change
63
Advertisement
Table of Contents
