Recording - Canon EOS C200 Instruction Manual

Digital cinema camera
Hide thumbs Also See for EOS C200:
Table of Contents

Advertisement

Recording Video

Recording

56
Q
1 Set the
• The camera turns on in
• The access indicators of card slots with a card inserted will illuminate momentarily in red. Then, the access
indicator of the recording media slot selected for recording will change to green.
2 Press the REC button to begin recording.
• Recording starts. The tally lamps illuminate and the recording indicator [ÜREC] appears at the top of the
screen.
• You can use the REC button on the camera's body (left side) or camera grip.
• You can also perform this function remotely using Browser Remote on a connected network device (A 158).
• For details about recording proxy clips, refer to
3 Press the REC button to stop recording.
• The clip is recorded and the camera enters record standby mode. The tally lamp will also go out.
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not open the card slot cover of the card being accessed and do not remove the card.
- Do not disconnect the power source or turn off the camera.
• Be sure to save your recordings regularly (A 147), especially after making important recordings. Canon shall
not be liable for any loss or corruption of data.
NOTES
NOTES
• You can use the review function (A 109) to play back part or all of the last clip recorded without having to
switch to
• If you record using metadata settings, those settings will be recorded with the clip. For more details, refer to
Setting the RAW File Clip Name
• If the camera switches to the other SD card while recording video due to the relay recording function (A 51),
the two parts (before/after the switch) will be recorded as separate clips.
• A single MP4 clip can be recorded continuously for up to 6 hours. At that point, a new clip will be created
automatically and recording will continue on a separate clip.
Tally lamp
SD card access indicators
switch to CAMERA.
mode and enters record standby mode.
mode.
(A 61).
Tally lamp
CFast card access
indicator
Simultaneous Recording of Proxy Clips
(A 110).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos c200b

Table of Contents