Inserting A Cfast Card; Removing A Cfast Card - Canon EOS C200 Instruction Manual

Preparing Recording Media

Inserting a CFast Card

1 Slide the CFast card slot cover switch in the direction of
the arrow.
48
• The CFast card slot cover will open.
2 Insert the CFast card straight, with the label facing the SD
card slots, all the way into the slot.
3 Close the CFast card slot cover.
• Do not force the cover closed if the CFast card is not
correctly inserted.
CFast card access indicator
CFast indicator
Red
Green
Off
> [B % System Setup] > [LED] > [CFast
If you set
Access LED] to [Off], the CFast card access indicator will not
illuminate.

Removing a CFast card

1 Wait until the CFast card access indicator is off or is
illuminated in green.
2 Slide the CFast card slot cover switch in the direction of the
arrow.
• The CFast card slot cover will open.
3 Make sure the CFast card access indicator is off and then
push the CFast card release button.
4 Pull out the CFast card and close the CFast card slot cover.
IMPORTANT
• Observe the following precautions while the CFast card access indicator is illuminated in red. Failure to do so
may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the cover of the CFast card slot being accessed.
CFast card status
Accessing the CFast card.
Recording/playback is possible.
A CFast card is not inserted.
CFast indicator