Selecting A Network Connection - Canon EOS C200 Instruction Manual

Selecting a Network Connection

You can save up to 4 network configuration profiles. If you just saved a new network configuration, it will already
be automatically selected so follow this procedure to select a different configuration profile.
1 Open the [Connection Settings] screen.
> [ ! Network Settings] > [Connection Settings]
2 Select the desired configuration number and then press the joystick.
3 Select [OK] and then press the joystick.
Checking and Changing Network Settings
You can check and, if necessary, edit the settings of the currently selected network configuration profile even
after the initial setup. Changing settings manually requires more advanced knowledge of Wi-Fi and network
settings.
1 Open the configuration profile selection submenu.
> [ ! Network Settings] > [Connection Settings]
2 Select the desired configuration number and then press the joystick.
3 Select [Edit] and then press the joystick.
4 Select [Infrastructure], [Camera Access Point] or [Ethernet].
• Continue with the procedure corresponding to the network connection method being used.
- For infrastructure connections, follow the procedure for
step 3 (A 152).
- For camera access point connections, follow the procedure for
(A 151).
- For Ethernet connections, follow steps 1 and 4 of the procedure for
Network
(A 156).
Selecting a Network Connection
Connecting in Infrastructure Mode
Camera Access Point
Connecting to a Wired (Ethernet)
157
starting from
starting from step 3