5
Playback
This section explains how to play back clips with the camera. For details on playing back clips using an external
Connecting to an External Monitor or Recorder
monitor, refer to
Viewing Photos
SD card, refer to
Operating modes:
Clip Index Screen
Playback functions are accessed from the clip index screen. To
open the clip index screen, set the camera to
the primary recording format is RAW, clips are saved on the CFast
card; when it is MP4, clips are saved on an SD card.
If the recording media contains clips recorded at a system
frequency other than the one currently used by the camera, you
will not be able to play back the clips. In such case, change the
camera's system frequency (A 64) to match the recordings on
the recording media.
Set the
Q
switch to MEDIA.
• The camera switches to
depends on the currently selected recording format but you can change the index screen with the procedure
on the next page.
(A 116).
mode and the clip index screen appears. The index screen that appears
4 5
1
2
3
11
(A 141). For details on viewing photos on the
mode. When
6
12
13
Playback
7
8
9
10
131