Removing The Fl Board Assembly And Switch Board Assembly; Removing The Mic Board Assembly - JVC DX-U10A Service Manual

3.1.15 Removing the FL BOARD assembly and SWITCH BOARD assembly

(See Fig.26)
(1) Remove the four screws V attaching the FL BOARD as-
sembly.
(2) Remove the six screws W attaching the SWITCH BOARD
assembly.

3.1.16 Removing the MIC BOARD assembly

(See Fig.27)
(1) Remove the two volume knobs.
(2) Remove the three screws X attaching the MIC BOARD as-
sembly.
1-18 (No.MB616<Rev.002>)
V
W W
Fig.26
X
Fig.27
V