Removing The Dvd Changer Mechanism Assembly - JVC DX-U10A Service Manual

3.1.2 Removing the DVD CHANGER MECHANISM assembly

(See Fig.3 to 6)
(1) Remove the two screws C attaching the DVD MECHA-
NISM assembly. (See Fig.3)
(2) Disconnect the card wires from DVD MECHANISM assem-
bly connected to connector
BOARD assembly. (See Fig.4)
(3) Disconnect the connector wire from USB board connected
to connector CN811 of the DVD BOARD assembly. (See
Fig.5)
(4) Disconnect the card wires from DVD BOARD assembly
connected to connector
board assembly. (See Fig.6)
C
CN800 and CN810 of the MAIN
CN921 and CN930 of the VIDEO
C
Fig.3
CN800
CN810
Fig.4
CN811
Fig.5
CN930
Fig.6
CN921
(No.MB616<Rev.002>)1-9