Removing The Surround Amp Board Assembly; Removing The Front Panel Assembly - JVC DX-U10A Service Manual

3.1.10 Removing the SURROUND AMP BOARD assembly

(See Fig.21)
(1) Remove the two screws N attaching the POWER AMP IC.
(2) Remove the one screw P attaching the IC BRACKET.
3.1.11 Removing the SUBWOOFER AMP BOARD assembly
(See Fig.21)
(1) Remove the four screws Q attaching the POWER AMP
ICs.

3.1.12 Removing the FRONT PANEL assembly

(See Fig.22, 23)
(1) Remove the one screw R attaching the EARTH WIRE from
MIC BOARD assembly. (See Fig.22)
(2) Remove the two screws S attaching the FRONT PANEL
assembly. (See Fig.23)
(3) Disengage two hooks c engaged both side of FRONT
PANEL assembly. (See Fig.22)
1-16 (No.MB616<Rev.002>)
N
P
Fig.21
R
Fig.22
S
Fig.23
Q
c
hook
S