JVC CA-DXU10 Instructions Manual

JVC CA-DXU10 Instructions Manual

Compact component system
Hide thumbs Also See for CA-DXU10:
Table of Contents

Advertisement

COMPACT COMPONENT SYSTEM
CA-DXU10
CA-DXU8
CA-DXU10
CA-DXU8
SUPER VIDEO
INSTRUCTIONS
GVT0210-001A
[US, UN, UG, UX, A, UW]

Advertisement

Table of Contents
loading

Summary of Contents for JVC CA-DXU10

  • Page 1 COMPACT COMPONENT SYSTEM CA-DXU10 CA-DXU8 CA-DXU10 CA-DXU8 SUPER VIDEO INSTRUCTIONS GVT0210-001A [US, UN, UG, UX, A, UW]...
  • Page 2: Important For Laser Products

    Warnings, Cautions and Others Caution–– (standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The • When the System is on standby, the STANDBY lamp lights red. •...
  • Page 3 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Front view Wall or obstructions CA-DXU10 CA-DXU8 Side view Wall or obstructions 15 cm...
  • Page 4: How To Read This Manual

    Playable Disc/File Types DIGITAL VIDEO SUPER VIDEO The “√” in the list below shows available disc/file types. Media type CD-R/ Recording format √ CD-DA (normal CD) √ VCD/SVCD DVD Video — DVD Audio — DVD-VR — Audio file: √ MP3/WMA/WAV Video file: √...
  • Page 5: Table Of Contents

    Precautions Installation • Install the System in a location with adequate ventilation to prevent internal heat build-up in the System. DO NOT install the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration. •...
  • Page 6: Connections

    TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copy- protected source. Connecting VIDEO OUT to an integrated TV/VCR system may interfere with your viewing. The illustration is CA-DXU10. From the video input of TV/monitor See page 4. Ÿ...
  • Page 7 TV/monitor Composite video cord (supplied) S-Video cord (not supplied) Green Component video cord (not supplied) • To select progressive scanning mode (see page 6), use COMPONENT jacks. • Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks; whichever you want to use. •...
  • Page 8 2Insert • When connecting the speaker cords, match their polarity with that of the speaker terminals: blue/red/green/white to (+) and black to (–). For CA-DXU10 From front right speaker (black/blue) From front left speaker (black/blue) From center speaker (black/green) From surround right...
  • Page 9: Connecting A Usb Mass Storage Class Device

    ¤ Voltage selector (not applicable for Australian models) Use a screwdriver to rotate the voltage selector so that the voltage mark is pointing to the same voltage as where you are plugging in the unit. (See also the back cover page.) Voltage mark Power cord Plug the AC power cord to a wall outlet.
  • Page 10: Display Indication

    The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 Audio signal indicators • L/R/C/LS/RS/LFE: lights to indicate the incoming audio channel signals.
  • Page 11: Daily Operations-Playback

    Daily Operations In this manual, the operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. AUDIO DISC 1 – DISC 5 PREV/ NEXT/...
  • Page 12: Adjusting The Volume

    Adjusting the Volume The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Remote control: Main unit: AUDIO To drop the volume in a moment FADE MUTING To restore the volume, press again or adjust the volume level.
  • Page 13: Playing Back A Disc/Usb Mass Storage Class Device

    Store the station. ENTER /SET To tune in to a preset station Select the band (FM or AM). FM/AM/AUX TUNER FM Select the preset number for the station you stored. • To select a number, see “How to select a number” on page 8. •...
  • Page 14 To select a disc DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Playback starts. Remote To select a title/group ONLY While playing... GROUP/TITLE • To select a number, see “How to select a number” on page 8. To select a chapter/track While playing...
  • Page 15: Playing Back A Tape

    7 For SVCD/VCD with PBC While playing a disc with PBC, “PBC” appears on the display instead of the playing time. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. •...
  • Page 16: Adjusting The Speaker Output Level

    Daily Operations Remote Control AUDIO CANCEL DVD LEVEL VARIO BASS SURROUND MODE DISPLAY DIMMER Main unit —Sound & Other Adjustments Adjusting the Speaker Output Level You can adjust the speaker output level from –6 (dB) to +6 (dB). Initial setting: +4 (dB). •...
  • Page 17: Applying An Optimal Bass Sound Effect-Vario Bass

    Applying an Optimal Bass Sound Effect —VARIO BASS You can adjust bass sound characteristics to create a sound suitable for the playback source of your preference. AUTO VARIO BASS (Initial setting) (Canceled) VARIO TURBO TECHNO AUTO The System automatically applies TURBO, LITE.n.EASY, MOVIE or TECHNO according to the playback source (initial setting).
  • Page 18: Selecting The Surround Modes

    Selecting the Surround Modes • For “DVD/CD” and “USB” (multi-channel software): SURROUND DOLBY D/DTS/PPCM/LPCM AUTO MODE STEREO Initial setting: DOLBY D/DTS/PPCM/LPCM* • For “DVD/CD” and “USB” (stereo software), “TAPE” and “AUX”: SURROUND AUTO ALL CH ST MOVIE MODE STEREO STADIUM Initial setting: ALL CH ST •...
  • Page 19: Changing The Display Brightness

    To adjust the picture tone Select “USER1” or “USER2.” • Follow steps 1 and 2 on page 15. Select a parameter you want to adjust. ENTER /SET GAMMA Adjust if the neutral color is bright or dark. The brightness of dark and bright portions is maintained (–3 to +3).
  • Page 20: Unique Video Disc/File Operations

    Unique Video Disc/File Operations Remote Control AUDIO MEMORY 3 DVD/CD 3 AUDIO/MPX SUB TITLE PAGE Selecting the Audio Track For DVD Video/DivX: While playing back a chapter/file containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
  • Page 21: Selecting The Subtitle Language

    Selecting the Subtitle Language For DVD Video/DVD Audio/DivX: While playing back a chapter/file containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn the subtitle on or off.
  • Page 22: Playing Back Bonus Group

    Playing Back Bonus Group For DVD Audio only: Some DVD Audio discs have a special group called “bonus group” whose contents are not open to the public. • To play back a bonus group, you have to enter the specific “key number”...
  • Page 23: Advanced Playback Operations

    Advanced Playback Operations Remote Control AUDIO DVD/CD 3 PREV/ NEXT/ CANCEL Main unit DISC 1 0 Programming the Playing Order —Program Play You can arrange the playing order of the chapters/tracks/ files (up to 99) before you start playback. • Program Play cannot be used for files in a USB mass AUDIO storage class device, Video files/JPEG files on a disc and DVD-VR.
  • Page 24: Playing At Random-Random Play

    To skip: To pause: PREV NEXT FM /PLAY MODE To release, press DVD/CD 3. * Resume does not work for Program Play. To check the programmed contents Before or after playback... In the reverse order. In the programmed order. To modify the program Before or after playback...
  • Page 25: Playing Repeatedly-Repeat Play

    Playing Repeatedly—Repeat Play You can repeat playback. • You can also select the repeat mode using the on-screen bar (see page 23. Not applicable for AV files and JPEG file.) • For Video file/JPEG file and DVD-VR, see page 28. •...
  • Page 26: On-Screen Operations

    On-Screen Operations Remote control AUDIO MEMORY 3 On-screen Bar Information You can check the playback information and use some functions through the on-screen bar. (Not applicable for Audio file and JPEG file.) On-screen bars AUDIO DVD Video Dolby D DVD-VIDEO 3/2.1ch DVD/CD 3 TIME...
  • Page 27: Operations Using The On-Screen Bar

    1 Disc type/source type 2 Playback information Indication Meanings Dolby D/DTS/ Audio format PPCM/LPCM 3/2.1 ch/ Channel number 2/0.0 ch PROGRAM/ Current play mode RANDOM Current disc DISC Current title TITLE Current chapter CHAP Current group GROUP Current track TRACK Current program Current playlist Time indications...
  • Page 28: Repeat Play

    To change the time information You can change the time information in the on-screen bar and the display window on the main unit. 1 Display the on-screen bar with the pull-down menu. Dolby D DISC 1 TITLE 2 CHAP 3 TITLE CHAP DVD-VIDEO...
  • Page 29 6 Select the end point (B). A-B Repeat starts. The selected ENTER portion plays repeatedly. /SET To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4. Time Search You can move to a particular point by specifying the elapsed playing time from the beginning.
  • Page 30: Operations Using The Control Screen

    Program: MENU/PL MENU/PG When Original Program screen is superimposed. ORIGINAL PROGRAM No Date itle 1 25/04/07 4ch 19:00 JVC DVD World 2004 2 17/05/07 8ch 10:30 3 22/05/07 8ch 17:00 Music Festival 4 26/05/07 L-1 13:19 children 001 5 20/06/07 4ch...
  • Page 31 To start playback For JPEG file: The selected file (still picture) is ENTER displayed until you change it. /SET Slide-show playback starts. Disc DVD/CD Each file (still picture) is shown on the screen for a few seconds, then changes one after another. •...
  • Page 32: Recording Operations

    Recording Operations Main unit TAPE-A~ MEMORY # USB/DISC REC START START/STOP DUBBING IMPORTANT It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Before recording, select the Stereo Mode (“STEREO”—see page 15) for multi-channel encoded software to downmix its multi-channel sound;...
  • Page 33: Dubbing Tapes

    Start recording. To stop recording Dubbing Tapes You can record a tape from deck A to deck B. Change the source to “TAPE”. Insert the source cassette in deck A, and a recordable cassette in deck B. Check the tape running direction and Reverse Mode settings on the display.
  • Page 34: Enjoying Karaoke

    Remote control AUDIO KARAOKE SCORING Source selecting buttons CANCEL MIC MIX VOCAL SUPPORT RESERVE Main unit DO NOT keep the microphones connected while they are not in use. Enjoying Karaoke • When you activate the Mic Mixing or Vocal Masking, the surround modes you selected will be changed to “ALL CH ST”...
  • Page 35: Adjusting The Sound Track For Karaoke

    Adjusting the Sound Track for Karaoke You can adjust the sound track for Karaoke. For stereo (2-channel) source: By selecting VOCAL MASK, you can reduce the lead vocal—Vocal Masking. For karaoke disc: By selecting R CHANNEL or L CHANNEL, you can select the audio channel to play. While Mic Mixing is activated...
  • Page 36: Changing The Karaoke Setting

    After the song ends, playback stops and the score board appears on the TV screen with fanfare. Ex.: KARAOKE SCORE BOARD POINTS Very good!! The latest top 3 kcal kcal The calorie you consumed in your singing • When you press 8, Karaoke Scoring is canceled. When playback starts again, Karaoke Scoring restarts.
  • Page 37 To change the scoring level You can change the scoring level of Karaoke Scoring. • This function is available only for disc/USB mass storage class device playback. Select “DVD/CD” or “USB” as the source. Connect the microphone(s) (not supplied) to the MIC1 and/or MIC2 jack.
  • Page 38: Reserving Karaoke Songs-Karaoke Program Play

    Reserving Karaoke Songs —Karaoke Program Play You can determine the playback order of the titles, chapters, tracks or files on the disc player. You can program up to 12 steps. • This function is not available for files in a USB mass storage class device.
  • Page 39: Timer Operations

    Remote control AUDIO AUDIO CANCEL SLEEP CLOCK/ TIMER Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite song. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically. •...
  • Page 40: Turning Off The Power Automatically

    Turn off the System (on standby) if you have set the timer with the System turned on. AUDIO How Recording Timer works When Recording Timer has been set, the timer indicator ) and the REC indicator are lit on the display. Recording Timer works only once.
  • Page 41: Setup Menu Operations

    Setup Menu Operations Remote Control AUDIO SET UP LANGUAGE menu Item MENU LANGUAGE You can select the initial menu language of DVD Video (see page 46). AUDIO LANGUAGE You can select the initial audio language of DVD Video (see page 46). SUBTITLE You can select the initial subtitle language of DVD Video (see page 46).
  • Page 42: Audio Menu

    AUDIO menu Item DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear. PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with STREAM/PCM: When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in DTS/ D.
  • Page 43: Operating The Tv

    Sony Toshiba Zenith Operating the TV Operating the TV You can operate JVC’s or other manufacturers’ TV using the remote control supplied for this System. Slide the AUDIO/TV selector to “TV.” AUDIO AUDIO Press and hold until the following steps are completed.
  • Page 44: Additional Information

    It may cause a malfunction of both the System and the device. – JVC bears no responsibility for any loss of data in the USB mass storage class device while using this System. – When connecting with a USB cable, use the cable whose length is less than 1 m.
  • Page 45: Daily Operations—Sound & Other Adjustments

    – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played.
  • Page 46 • The programmed contents will remain until you erase it. • While the PROGRAM indicator is on, you cannot change the disc to play. (DISC 1 – DISC 5 on the remote control and 3 on the main unit do not work.) On-Screen Operations (see pages 23 to 28) Operations Using the On-screen Bar:...
  • Page 47 Timer Operations (see pages 36 to 37) Setting the Timer: • If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when timer is activated. •...
  • Page 48: Troubleshooting

    Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled.
  • Page 49: Optical Digital Output Signals

    OPTICAL DIGITAL OUTPUT Signals DIGITAL AUDIO OUTPUT Playback disc/file DVD Video with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM with Dolby Digital with DTS DVD Audio with 48/96/192 kHz, 16/20/24 bit Linear PCM with 44.1/88.2/176.4 kHz, 16/20/24 bit Linear PCM with Dolby Digital with DTS...
  • Page 50: Specifications

    FRONT SPEAKERS: 150 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. CENTER SPEAKER: CA-DXU10: 140 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
  • Page 51: Parts Index

    Remote control Button Page Button AUDIO 8, 37 MENU/PL MIC MIX 7 7 7 7 MIC VOL +, – D 10, 12, 19, 21, 28, 32 ¡ ¡ ¡ ¡ 9, 11, 12, 19, 22, ON SCREEN PAGE 9, 11, 12, 19 REPEAT 4 , PREV REPEAT A-B U...
  • Page 52 Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, and U.K.) CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.
  • Page 53 COMPACT COMPONENT SYSTEM CA-DXU6 CA-DXU6 SUPER VIDEO INSTRUCTIONS GVT0209-001A [US, UN, UG, UX, A, UW]...
  • Page 54 Warnings, Cautions and Others Caution–– (standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The • When the System is on standby, the STANDBY lamp lights red. •...
  • Page 55 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below. 3.
  • Page 56 Playable Disc/File Types SUPER VIDEO DIGITAL VIDEO The “√” in the list below shows available disc/file types. Media type CD-R/ Recording format √ CD-DA (normal CD) √ VCD/SVCD DVD Video — DVD Audio — DVD-VR — Audio file: √ MP3/WMA/WAV Video file: √...
  • Page 57 Precautions Installation • Install the System in a location with adequate ventilation to prevent internal heat build-up in the System. DO NOT install the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration. •...
  • Page 58: Connections

    Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copy- protected source.
  • Page 59 TV/monitor Composite video cord (supplied) S-Video cord (not supplied) Green Component video cord (not supplied) • To select progressive scanning mode (see page 6), use COMPONENT jacks. • Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks; whichever you want to use. •...
  • Page 60: Power Cord

    Speakers To connect the speaker cords 1Push 2Insert • When connecting the speaker cords, match their polarity with that of the speaker terminals: blue/red/white to (+) and black to (–). From front right speaker (black/blue) From front left speaker (black/blue) From subwoofer (black/red) •...
  • Page 61: Connecting A Usb Mass Storage Class Device

    Connecting a USB Mass Storage Class Device You can connect a USB mass storage class device such as a USB flash memory, hard disk drive, multimedia card reader, digital camera, etc. to this System. USB cable (not supplied) Main unit •...
  • Page 62: Display Indication

    The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 Disc indicators • 1 – 5: lights to indicate the current disc tray. •...
  • Page 63: Daily Operations-Playback

    Daily Operations In this manual, the operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. AUDIO DISC 1 – DISC 5 PREV/ NEXT/...
  • Page 64: Adjusting The Volume

    Adjusting the Volume The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Remote control: Main unit: AUDIO To drop the volume in a moment FADE MUTING To restore the volume, press again or adjust the volume level.
  • Page 65: Playing Back A Disc/Usb Mass Storage Class Device

    Store the station. ENTER /SET To tune in to a preset station Select the band (FM or AM). FM/AM/AUX TUNER FM Select the preset number for the station you stored. • To select a number, see “How to select a number” on page 8. •...
  • Page 66 To select a disc DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Playback starts. Remote To select a title/group ONLY While playing... GROUP/TITLE • To select a number, see “How to select a number” on page 8. To select a chapter/track While playing...
  • Page 67: Playing Back A Tape

    7 For SVCD/VCD with PBC While playing a disc with PBC, “PBC” appears on the display instead of the playing time. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. •...
  • Page 68: Adjusting The Speaker Output Balance

    Daily Operations Remote Control AUDIO CANCEL DVD LEVEL VARIO BASS 3D PHONIC DISPLAY DIMMER Main unit —Sound & Other Adjustments Adjusting the Speaker Output Balance You can adjust the speaker output balance. BALANCE AUDIO Reinforcing the Bass Sound You can adjust the subwoofer level from level 1 (minimum) , , , , to level 4 (maximum).
  • Page 69: Selecting The Sound Modes

    Selecting the Sound Modes You can select one of the preset Sound Modes. SEA Modes ROCK CLASSIC SOUND MODE FLAT USER1–3 SEA (Sound Effect Amplifier) Modes ROCK Boosts low and high frequency. Good for acoustic music (initial setting). Good for music with an emphasis on vocal. CLASSIC Good for classical music.
  • Page 70: Creating 3-Dimensional Sound Field-3D Phonic

    Creating 3-Dimensional Sound Field —3D Phonic This function is available only for disc/USB mass storage class device playback. • This function is not available for DivX file. While playing a disc/USB mass storage class device... 3D PHONIC 3D PHONIC ACTION 3D PHONIC 3D PHONIC 3D PHONIC...
  • Page 71: Changing The Display Brightness

    To adjust the picture tone Select “USER1” or “USER2.” • Follow steps 1 and 2 on page 15. Select a parameter you want to adjust. ENTER /SET GAMMA Adjust if the neutral color is bright or dark. The brightness of dark and bright portions is maintained (–3 to +3).
  • Page 72: Unique Video Disc/File Operations

    Unique Video Disc/File Operations Remote Control AUDIO MEMORY 3 DVD/CD 3 AUDIO/MPX SUB TITLE PAGE Selecting the Audio Track For DVD Video/DivX: While playing back a chapter/file containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
  • Page 73: Selecting The Subtitle Language

    Selecting the Subtitle Language For DVD Video/DVD Audio/DivX: While playing back a chapter/file containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn the subtitle on or off.
  • Page 74: Playing Back Bonus Group

    Playing Back Bonus Group For DVD Audio only: Some DVD Audio discs have a special group called “bonus group” whose contents are not open to the public. • To play back a bonus group, you have to enter the specific “key number”...
  • Page 75: Advanced Playback Operations

    Advanced Playback Operations Remote Control AUDIO DVD/CD 3 PREV/ NEXT/ CANCEL Main unit DISC 1 0 Programming the Playing Order —Program Play You can arrange the playing order of the chapters/tracks/ files (up to 99) before you start playback. • Program Play cannot be used for files in a USB mass AUDIO storage class device, Video files/JPEG files on a disc and DVD-VR.
  • Page 76: Playing At Random-Random Play

    To skip: To pause: PREV NEXT FM /PLAY MODE To release, press DVD/CD 3. * Resume does not work for Program Play. To check the programmed contents Before or after playback... In the reverse order. In the programmed order. To modify the program Before or after playback...
  • Page 77: Playing Repeatedly-Repeat Play

    Playing Repeatedly—Repeat Play You can repeat playback. • You can also select the repeat mode using the on-screen bar (see page 23. Not applicable for AV files and JPEG file.) • For Video file/JPEG file and DVD-VR, see page 28. •...
  • Page 78: On-Screen Operations

    On-Screen Operations Remote control AUDIO MEMORY 3 On-screen Bar Information You can check the playback information and use some functions through the on-screen bar. (Not applicable for Audio file and JPEG file.) On-screen bars AUDIO DVD Video Dolby D DVD-VIDEO 3/2.1ch DVD/CD 3 TIME...
  • Page 79 1 Disc type/source type 2 Playback information Indication Meanings Dolby D/DTS/ Audio format PPCM/LPCM 3/2.1 ch/ Channel number 2/0.0 ch PROGRAM/ Current play mode RANDOM Current disc DISC Current title TITLE Current chapter CHAP Current group GROUP Current track TRACK Current program Current playlist Time indications...
  • Page 80 To change the time information You can change the time information in the on-screen bar and the display window on the main unit. 1 Display the on-screen bar with the pull-down menu. Dolby D DISC 1 TITLE 2 CHAP 3 TITLE CHAP DVD-VIDEO...
  • Page 81 6 Select the end point (B). A-B Repeat starts. The selected ENTER portion plays repeatedly. /SET To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4. Time Search You can move to a particular point by specifying the elapsed playing time from the beginning.
  • Page 82: Operations Using The Control Screen

    Program: MENU/PL MENU/PG When Original Program screen is superimposed. ORIGINAL PROGRAM No Date itle 1 25/04/07 4ch 19:00 JVC DVD World 2004 2 17/05/07 8ch 10:30 3 22/05/07 8ch 17:00 Music Festival 4 26/05/07 L-1 13:19 children 001 5 20/06/07 4ch...
  • Page 83 To start playback For JPEG file: The selected file (still picture) is ENTER displayed until you change it. /SET Slide-show playback starts. Disc DVD/CD Each file (still picture) is shown on the screen for a few seconds, then changes one after another. •...
  • Page 84: Recording Operations

    Recording Operations Main unit TAPE-A~ MEMORY # USB/DISC REC START START/STOP DUBBING IMPORTANT It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Recording onto a Tape You can use type I tapes for recording. •...
  • Page 85: Dubbing Tapes

    Start recording. To stop recording Dubbing Tapes You can record a tape from deck A to deck B. Change the source to “TAPE”. Insert the source cassette in deck A, and a recordable cassette in deck B. Check the tape running direction and Reverse Mode settings on the display.
  • Page 86: Enjoying Karaoke

    Remote control AUDIO KARAOKE SCORING Source selecting buttons CANCEL MIC MIX VOCAL SUPPORT RESERVE Main unit DO NOT keep the microphones connected while they are not in use. Enjoying Karaoke IMPORTANT • Always set MIC LEVEL to “0” when connecting or disconnecting the microphone.
  • Page 87: Adjusting The Sound Track For Karaoke

    Adjusting the Sound Track for Karaoke You can adjust the sound track for Karaoke. For stereo (2-channel) source: By selecting VOCAL MASK, you can reduce the lead vocal—Vocal Masking. For karaoke disc: By selecting R CHANNEL or L CHANNEL, you can select the audio channel to play. While Mic Mixing is activated...
  • Page 88: Changing The Karaoke Setting

    After the song ends, playback stops and the score board appears on the TV screen with fanfare. Ex.: KARAOKE SCORE BOARD POINTS Very good!! POINTS The latest top 3 POINTS POINTS kcal kcal The calorie you consumed in your singing •...
  • Page 89 To change the scoring level You can change the scoring level of Karaoke Scoring. • This function is available only for disc/USB mass storage class device playback. Select “DVD/CD” or “USB” as the source. Connect the microphone(s) (not supplied) to the MIC1 and/or MIC2 jack.
  • Page 90: Reserving Karaoke Songs-Karaoke Program Play

    Reserving Karaoke Songs —Karaoke Program Play You can determine the playback order of the titles, chapters, tracks or files on the disc player. You can program up to 12 steps. • This function is not available for files in a USB mass storage class device.
  • Page 91: Timer Operations

    Remote control AUDIO AUDIO CANCEL SLEEP CLOCK/ TIMER Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite song. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically. •...
  • Page 92: Turning Off The Power Automatically

    Turn off the System (on standby) if you have set the timer with the System turned on. AUDIO How Recording Timer works When Recording Timer has been set, the timer indicator ) and the REC indicator are lit on the display. Recording Timer works only once.
  • Page 93: Setup Menu Operations

    Setup Menu Operations Remote Control AUDIO SET UP LANGUAGE menu Item MENU LANGUAGE You can select the initial menu language of DVD Video (see page 46). AUDIO LANGUAGE You can select the initial audio language of DVD Video (see page 46). SUBTITLE You can select the initial subtitle language of DVD Video (see page 46).
  • Page 94 AUDIO menu Item DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear. PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with STREAM/PCM: When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in DTS/ DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT”...
  • Page 95: Operating The Tv

    Sony Toshiba Zenith Operating the TV Operating the TV You can operate JVC’s or other manufacturers’ TV using the remote control supplied for this System. Slide the AUDIO/TV selector to “TV.” AUDIO AUDIO Press and hold until the following steps are completed.
  • Page 96: Additional Information

    It may cause a malfunction of both the System and the device. – JVC bears no responsibility for any loss of data in the USB mass storage class device while using this System. – When connecting with a USB cable, use the cable whose length is less than 1 m.
  • Page 97 • For JPEG playback... – This System can play back JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower). – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) –...
  • Page 98 On-Screen Operations (see pages 23 to 28) Operations Using the On-screen Bar: • A-B Repeat is possible only within the same title or within the same track. Recording Operations (see pages 29 to 30) General: • You cannot change the source during recording. •...
  • Page 99 Timer Operations (see pages 36 to 37) Setting the Timer: • If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when timer is activated.
  • Page 100: Troubleshooting

    Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled.
  • Page 101 OPTICAL DIGITAL OUTPUT Signals DIGITAL AUDIO OUTPUT Playback disc/file DVD Video with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM with Dolby Digital with DTS DVD Audio with 48/96/192 kHz, 16/20/24 bit Linear PCM with 44.1/88.2/176.4 kHz, 16/20/24 bit Linear PCM with Dolby Digital with DTS...
  • Page 102: Specifications

    Specifications Amplifier section Output Power: FRONT SPEAKERS: 150 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. SUBWOOFER: 150 W, min. RMS, driven into 4 Ω at 63 Hz with no more than 10% total harmonic distortion.
  • Page 103: Parts Index

    Remote control Button Page Button AUDIO 8, 37 KARAOKE SETTING L/R BALANCE I 7 7 7 7 10, 12, 19, 21, MENU/PL 28, 32 MIC MIX ¡ ¡ ¡ ¡ MIC VOL +, – D 9, 11, 12, 19, 22, 9, 11, 12, 19 ON SCREEN 4 , PREV...
  • Page 104 Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, and U.K.) CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.

This manual is also suitable for:

Ca-dxu8

Table of Contents