Removing The Blower Module - Cisco 12410 Installation And Configuration Manual

Chapter 3 Installing the Router

Removing the Blower Module

Step 1
Step 2
Step 3
Warning
OL-11496-01
By removing the blower module from the chassis, you can reduce the top-end
weight of the chassis by approximately 20.5 pounds (9.3 kg).
Use the following procedure to remove the blower module from the chassis
(Figure 3-7).
Loosen the captive screw on each side of the blower module.
Pull the blower module halfway out of the module bay.
Slide out the blower module completely from the module bay while supporting it
with your other hand.
The blower module weighs approximately 20 pounds (9 kg). Use two hands
when handling the blower module.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Removing Components Before Installing the Chassis
3-11