Rack-Mounting Guidelines - Cisco 12410 Installation And Configuration Manual

Chapter 2 Preparing for Installation
Figure 2-5 Original Router Chassis Footprint and Dimensions—Top View
Back
Vertical
rack-mounting
flange
(each side)
Front
OL-11496-01
Use appropriate strain-relief methods to protect cables and equipment
–
connections.
Make sure that cables from other equipment installed in the rack do not
–
restrict access to the card cages.
To avoid noise interference in network interface cables, do not route them
•
directly across or along power cables.
Figure 2-5 shows the footprint and outer dimensions of the original router chassis.
17.39 in.
Plastic front cover
19.00 in.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Site Requirement Guidelines
21 in.
2.90 in.
2.10 in.
2-11