Saving The Running Configuration Settings To Nvram - Cisco 12410 Installation And Configuration Manual

Chapter 4 System Startup and Basic System Configuration

Saving the Running Configuration Settings to NVRAM

Note
OL-11496-01
clock source internal
!
interface POS1/1
no ip address
no ip route-cache cef
no ip route-cache
shutdown
crc 32
!
interface POS1/2
no ip address
no ip route-cache cef
no ip route-cache
shutdown
crc 32
!
interface POS1/3
no ip address
no ip route-cache cef
no ip route-cache
shutdown
crc 32
The copy running-config startup-config command saves the configuration
settings that you created while in the global configuration mode to NVRAM. Be
sure to enter this command any time you make changes to configuration settings.
Milo# copy running-config startup-config
If you do not save the running configuration settings to NVRAM, they will be lost
the next time you reload the system.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Cisco IOS User Interface
4-29