Configuring The Protocol Settings - Canon LBP6680x E-Manual

Configuring the Protocol Settings

This section describes the procedure for specifying the settings using the Remote UI.
In the Remote UI, you can specify the settings by accessing the printer from a Web browser via a network.
IMPORTANT
Before configuring the protocol settings
When configuring the protocol settings for the printer using the above software, the TCP/IP protocol must be able to
be used in your network environment.
Make sure that each setting option for TCP/IP is specified, the printer and computer are connected properly, and the
printer is ON.
NOTE
When specifying the settings using software other than the Remote UI
You can also specify the settings using the following software.
"FTP Client"
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
The specifiable options vary depending on the software. See
appropriate to the network environment you are using or options that you want to specify.
1
Start the Remote UI, and then log in as Administrator.
"Starting the Remote UI"
2
Click [Settings/Registration].
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com manuals search engine
"Network Setting Items" and use software
04L9-098