Table of Contents
Advertisement
Turning OFF the Printer
To stop the printer properly, use the following procedure for turning the printer OFF.
1
Check that the printer is not performing the following operations.
Printing
While the printer is running a self-diagnostic test immediately after turning the power ON
While the
When any of the following messages appears
<Starting up...>
<Initializing NVRAM>
2
Press [
] (
3
Select [Shut Down] using [
IMPORTANT
If "Could not execute." is displayed
There is a Secure Print job in the SD card.
If shutdown is running, after deleting the job using a soft reset, run the shutdown operation again.
If shutdown is not running, press [
NOTE
When you are using WSD printing
The shutdown notifies the computer that the printer is turned OFF.
4
Select [Yes] using [
After the message appears, turn OFF the printer automatically.
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
(Job) indicator is on or blinking
: Reset).
] and [
], and then press [OK].
] (
], and then press [OK].
manuals search engine
: Online).
Advertisement
Table of Contents
