Table of Contents
Advertisement
(3) Attach and fasten the screw.
5
Hard reset or restart the printer.
If <Formatting SD Card?> appears in the display after the printer starts, the SD card is being formatted.
Wait for a moment until the format is completed.
IMPORTANT
If <Formatting SD Card?> does not appear in the display
Perform [Format] in [SD Card Maintenance] in the common Setup menu.
"[Setup] Menu ([User Maintenance] Options)"
6
Connect all the interface cables.
NOTE
Setting after the SD card is installed
Perform the following procedure after the SD card is installed.
(1) Display the [Device Settings] sheet in the printer driver.
For details on the procedure for displaying the sheet, see
(2) Click [Get Device Status].
If you cannot obtain the status of the optional accessories automatically, select the [SD Card Installed] check
box.
For details on the procedure for Macintosh, see
Next, perform the following procedures.
If you install the printer and SD card at the same time
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
manuals search engine
"Setting the Printer
"Setting the Printer
Options."
Options."
Advertisement
Table of Contents
