Canon LBP6680x E-Manual page 489

1. Enter an arbitrary printer name in [Name], and then press the [ENTER] key on your keyboard.
2. When using the printer in Queue Server Mode, select [Defined] in [Type].
3. When using the printer in Remote Printer Mode, select [Remote Parallel] in [Type], and then set [Port] to [LPT1].
4. Specify the settings for the other options, and then press the [ESC] key on your keyboard.
5. If the confirmation box appears, select [Yes], and then press the [ENTER] key on your keyboard.
6. Press the [ESC] key on your keyboard to go back to the [Print Server Configuration] list.
6
Assign a queue to the printer.
1. Select [Queues Serviced by Printer], and then press the [ENTER] key on your keyboard.
2. Select the printer name specified in Step 5, and then press the [ENTER] key on your keyboard.
3. Press the [INSERT] key on your keyboard.
4. Select the queue created in Step 3, and then press the [ENTER] key on your keyboard.
7
Press the [ESC] key on your keyboard until the [Exit PCONSOLE] window appears, and then select
[Yes] to exit PCONSOLE.
8
When using the printer in Remote Printer Mode, start the print server.
1. When you are using a computer exclusively as the print server, enter "PSERVER.EXE" in the computer as the print
server name, and then press the [ENTER] key on your keyboard.
2. When using the NetWare file server as the print server, enter "LOAD PSERVER.NLM <the print server name>" in the
file server, and then press the [ENTER] key on your keyboard.
The settings for NetWare print service are now completed.
NOTE
About Queue Server Mode
When using the printer in Queue Server Mode, you do not need to specify these settings.
9
Next, configure the NetWare protocol settings for the printer.
For details on the procedure for configuring the NetWare protocol, see
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com manuals search engine
"Configuring the Protocol Settings."