Table of Contents
Advertisement
IMPORTANT
About the paper loading orientation
If you are not using the UFR II printer driver, load paper in portrait orientation.
Also, be sure to load paper in landscape orientation if all the following conditions are met.
You are using the UFR II printer driver.
[Drawer 1 Size] and [Drawer 2 Size] are set to [Mixed Sizes].
Custom size paper whose long edges are 215.9 mm or less is loaded.
NOTE
When loading paper with a letterhead or logo
See
"Paper Loading
4
Align the paper guides to the loaded paper.
While holding the lock release lever (A), adjust the guides.
IMPORTANT
Be sure to align the paper guides to the paper.
If the paper guides are too loose or too tight, this may result in paper being misfed or paper jams.
5
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
Orientation" and load the paper in the correct orientation.
When loading paper shorter than A5:
Adjust the paper guide at the rear center to fit the length of paper.
manuals search engine
Advertisement
Table of Contents
