RAW Settings
IPP/IPPS Settings
WSD Settings
HTTP Settings
Setting SSL Keys and Certificates
Proxy Settings
Multicast Discovery Settings
SNTP Settings
Department ID Management PIN Configuration Settings (LBP6680x Only)
IP Address Settings
(1) Click [Edit...] in [IPv4 Settings].
(2) Set the IP address.
[Use IPv4]
[Select Protocol]
When [Off] is selected using [Select Protocol], set the following items.
[IP Address]
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
When the check box is selected, use IPv4.
Select the protocol used from [Off], [DHCP], [RARP] or [BOOTP].
Enter the printer's IP address.
manuals search engine