Using A Pen; Removing The Side Switch - Wacom CLINIQ 21UX DTZ-2100 User Manual

Using the Grip Pen

Using a Pen

Pointing and Selecting
Move the pen above Cintiq Display screen to position the screen cursor.
The cursor instantly jumps to the new location (absolute positioning). Press the pen tip on the Cintiq Display screen to
make a selection.
NOTE : If the screen cursor is not aligned with the pen tip, you will need to calibrate the Cintiq Display.
Clicking
Tap the Interactive Pen Display screen once with
the pen tip, or touch the pen to the display screen
with enough pressure to generate a mouse click.
Dragging
Select an object, then slide the pen tip across the
Interactive Pen Display screen to move the object.

Removing the Side Switch

If you prefer to remove the side switch, follow the instruc-
tions below.
Firmly clasp the switch in the middle, pressing into the
rubber grip, and pull out to remove.
IMPORTANT : Be sure to pull
from the center of the switch.
Prying the switch end with your
fingernail or some other tool may
damage the pen.
Turn the pen tip cone counterclockwise to remove.
Pull the rubber grip forward to remove.
Install the rubber grip having no side switch access
slot by aligning the pen case rails with the grooves
inside the grip and pushing the grip over the pen tip.
Replace the pen tip cone by turning it clockwise onto
the pen. Pull back on the rubber grip end if there is
a gap between the cone and the grip.
To reinstall the side switch, reverse the above proce-
dure.
20
Double-Clicking
Press the upper side switch (Windows systems) or quickly tap the
Interactive Pen Display screen twice in the same place with the
pen tip. Double-clicking is easier when the pen is perpendicular to
the tablet screen.
Erasing
In supporting applications, the pen's eraser works like the eraser
on a pencil. In text applications, use the eraser to select text, then
lift the eraser from the tablet to delete the text.
Rubber Grip
Sectional