Adjusting Pitch And Phase - Wacom CLINIQ 21UX DTZ-2100 User Manual

Adjusting Pitch and Phase

Some models of computer and graphics card may not allow the Auto Adjust to fully work when Cintiq is first connected.
If the display does not fit the LCD panel border or some portion of text appears blurred, adjust pitch and phase by
following the below procedure. For the best effect, a resolution of 1600 x 1200 is recommended.
From the W T
ACOM
trol Panel, select the C
tab.
TION
If you are working with mul-
tiple monitors, select the Moni-
tor that corresponds to Cintiq.
Click on the C
ALIBRATE
ton to display the monitor
calibration screen.
Open the OSD Menu and
select the PITCH icon.
Adjust the PITCH level so that
the pattern of fine vertical
stripes displays evenly.
In the OSD Menu, select
the PHASE icon and adjust
the PHASE level so that the
adjustment pattern shows
clearly.
After completing the adjust-
ments press the ENTER
button and MENU button to
exit the OSD Menu.
Con-
ABLET
-
ALIBRA
... but-
(VGA only)
Adjustment pattern
17