Calibrating The Tablet - Wacom CLINIQ 21UX DTZ-2100 User Manual

Customizing Cintiq – The Basics

Calibrating the Tablet

You will need to calibrate the tablet in order to line up the screen cursor position with the position of the pen on the In-
teractive Pen Display. This is required to adjust for parallax caused by the clear plastic overlay. After setting the tablet in its
working position, follow the procedure below to calibrate the tablet.
From the W T
ACOM
trol Panel, select the C
tab.
TION
If you are working with
multiple monitors, select the
Monitor that corresponds to
the tablet's LCD display.
Click on the C
ALIBRATE
ton to display the monitor
calibration screen.
Hold the pen as you normally
do, and use the pen tip to
click on the cross-hairs in the
upper-left corner.
Then click on the cross-hairs
that are displayed in the lower-
right corner. (For Windows
systems, you will need to click
A or OK for the changes
PPLY
to take effect.)
NOTE: The calibration setting
applies to all applications.
14
Con-
ABLET
-
ALIBRA
... but-