Installation; Tablet Software Installation For Windows And Macintosh - Wacom CLINIQ 21UX DTZ-2100 User Manual

Installation

Tablet Software Installation for Windows* and Macintosh
After connecting all cables of Cintiq, turn on Cintiq and your computer. Allow the operating system to fully load.
Insert the Wacom Tablet Driver CD into the CD-ROM drive. The Wacom tablet software installer menu should au-
tomatically display. If the menu does not display, double-click on the I
I C
button and follow the prompts to install the driver software.
NSTALL INTIQ
Windows: After the driver installation is complete, make sure you can use your pen on the tablet display to move the
screen cursor.
Macintosh: After the driver installation is complete, restart your Macintosh. You will be able to use your pen on the
tablet display to move the screen cursor.
Be sure to read the R
EAD
If you have trouble in the Tablet software installation, refer to the Troubleshooting chapter in the online Hel
com Tablet Driver CD. You can also open the online Help from the H
Precede to Customizing Your Cintiq - The Basics.
* Windows 95 and later.
12
M
file for late braking news.
E
icon (located on the CD). Click on the
NSTALL
menu from the W
ELP ACOM
in the Wa-
P
T
control panel.
ABLET