Mac-Address-Table Notification; Mac-Address-Table Notification History-Size - Planet Networking & Communication SGS-6340-24T4S Command Manual

18.3.2 mac-address-table notification

Command:
mac-address-table notification
no mac-address-table notification
Function:
Enable the MAC address notification globally, the no command disables the global MAC address notification.
Parameter:
None.
Default:
Disable.
Command Mode:
Global mode
Usage Guide:
This command is used with trap switch of snmp. When disabling the MAC address notification,
configuration can be shown, but the function is invalid.
Example:
Enable the MAC address notification.
Switch(Config)#mac-address-table notification

18.3.3 mac-address-table notification history-size

Command:
mac-address-table notification history-size <0-500>
no mac-address-table notification history-size
Function:
Configure the maximum history-size for storing MAC changing message, the no command restores the default
value.
Parameter:
history-size: data length of sending the notification, its range from 1 to 500.
18-88
other