Description; Flow Control - Planet Networking & Communication SGS-6340-24T4S Command Manual

4.1.3 description

Command:
description <string>
no description
Function:
Set name for specified port; the no command cancels this configuration.
Parameter:
<string> is a character string, which should not exceed 200 characters.
Command Mode:
Port Mode.
Default:
No port name by default.
Usage Guide:
This command is for helping the user manage switches, such as the user assign names according to the port
application, e.g. financial as the name of 1/1-2 ports which is used by financial department, engineering as the name
of 1/9 ports which belongs to the engineering department, while the name of 1/12 ports is assigned with Server,
which is because they connected to the server. In this way the port distribution state will be brought to the table.
Example:
Specify the description of 1/1-2 port as financial.
Switch(config)#interface ethernet 1/1-2
Switch(Config-If-Port-Range)#description financial

4.1.4 flow control

Command:
flow control
no flow control
Function:
Enables the flow control function for the port: the "no flow control" command disables the flow control function for
the port.
4-148