Chapter 1 Commands For Basic Switch Configuration; Commands For Basic Configuration; Authentication Line - Planet Networking & Communication SGS-6340-24T4S Command Manual

Chapter 1 Commands for Basic Switch

1.1 Commands for Basic Configuration

1.1.1 Authentication line

Command:
authentication line {console | vty | web} login {local | radius | tacacs}
no authentication line {console | vty | web} login
Function:
Configure VTY (login with Telnet and SSH), Web and Console, so as to select the priority of the authentication mode
for the login user. The no form command restores the default authentication mode.
Default:
No configuration is enabled for the console login method by default. Local authentication is enabled for the VTY and
Web login method by default.
Command Mode:
Global Mode.
Usage Guide:
The authentication method for Console, VTY and Web login can be configured respectively. And authentication
method can be any one or combination of Local, RADIUS and TACACS. When login method is configuration in
combination, the preference goes from left to right. If the users have passed the authentication method,
authentication method of lower preferences will be ignored. To be mentioned, the user can login as long as a
authentication method is passed. AAA function and RADIUS server should be configured before the RADIUS
authentication can be used.
The authentication line console login command is exclusive with the login command. The authentication line
console login command configures the switch to use the Console login method. And the login command makes the
Console login to use the passwords configured by the password command for authentication.
If local authentication is configured while no local users are configured, users will be able to login the switch via the
Console method.
Configuration
1-42