Brother TD-2020 Service Manual page 80

Make sure that the machine is connected to the PC, and then click [Run] button on the main
window. The inspection item currently selected (yellow background) will be implemented.
To change the selected inspection, press the [Down] or [Up] button. When all required
inspection items are completed, click the [To next check] button to proceed to the next
inspection.
Selected inspection is highlighted in yellow.
Press here to clear the result and go to the next inspection.
Press here to start the selected inspection.
Press here to change the selected inspection.
Figure 2. Main window (TD-2130N serviceman tool)
1 - 5