21Check Holder Adaptor Ad - Brother TD-2020 Service Manual

1.2.21 Check Holder Adaptor AD
Checks that the power is supplied normally by connecting the AC adapter to the optional
battery base unit.
Model
TD-2000
TD-2100N
(1) Connect the AC adapter to the optional battery base unit first, and then remove the Li-ion
rechargeable battery.
(2) Make sure that the "Check holder adaptor AD" field is highlighted in yellow and press the
[Run] button to start the inspection.
(3) A/D value to be checked appears in the "Ad" field. Once "OK" appears for all items, the
inspection finishes automatically.
Note : If any item is not "OK", press the [NG] button to finish the inspection.
 Conditions required for OK
"Adaptor State" indicates that the AC adapter connector detected "in" (connected).
Inspection
Invalid
Valid
Figure 46. "Check holder adaptor AD" start-up
Figure 47. "Check battery holder" window
1 - 29