(6) Set the roll cover clear to the roll cover inner, and secure it with four taptite bind B
M2.6X8 screws.
(7) Set the roll cover front and the roll cover outer B to the roll cover inner, and
secure them with six taptite bind B M2.6X8 screws.
NOTE: Use two screws for front side and four screws for back side.
Roll cover outer B
Roll cover front
Taptite bind B M2.6X8
Taptite bind B M2.6X8
Figure 3.5-14
III - 39
Taptite bind B M2.6X8
Roll cover clear
Roll cover inner