Appendix 1 Serviceman Software Tool; Introduction; Software Tools; Items Required For The Inspection - Brother TD-2020 Service Manual

APPENDIX 1 SERVICEMAN SOFTWARE TOOL

1.1 Introduction

1.1.1 Software Tools

In addition to the primary serviceman tool, the buffer analysis tool is also equipped for TD-
20220/2120N/2130N. Implement each tool as usage.
• Serviceman tool
This tool is used to change EEPROM setting and check functions after machine repair or
PCB replacement. Serviceman tool does not perform inspection for optional products. Note
that separate inspections are required as needed.
• Buffer analysis tool
This tool serves to analyze commands and other data received by the machine.

1.1.2 Items Required for the Inspection

To use serviceman tool, the following items are required:
Items required for the inspection (1)
Item
PC
USB cable
RS-232C cable
AC adapter
USB bar code reader
Media for reflection sensor
adjustment
Items required for the inspection (2)
Li-ion rechargeable battery
80GS OJI roll ASSY
RDU F59X102 1 ASSY
RDJ51X26N roll ASSY
RS-232C cable (adapter)
Optional touch panel display unit
Optional battery base unit
Optional peeler
Note : Optional touch panel display unit, optional battery base unit, and optional peeler are
used to check performance of the connector on the machine side. Connect to the
machine with no optional products attached, and check the performance. Even the
machine has been equipped with optional products at the time of service, you can still
operate inspection.
Supported OS are Windows XP and Windows 7. A COM port is
required.
The one included in TD-2000 / 2100N package or equivalent.
D-Sub9pin (Interlink supported) female, female
The one included in TD-2000 / 2100N package.
Refer to "8. Connecting a bar code reader" in the TD series USER'S
GUID to check operation of the bar code reader beforehand.
Use DK label roll (62x100mm).
Item
LI-ION BATTERY PA-BT-4000LI
80GS OJI ROLL ASSY
RD-U F59X102 ASSY
RD-S05J1 P51X26 N ROLL ASSY
PA-SCA-001
PA-TDU-001
PA-BB-001
PA-LP-001
Remark
Item code
1 - 1