Brother TD-2020 Service Manual page 66

<Error log>
Error information (error code and total pages printed at the time of the error) are logged in the
event of following errors.
The latest error information is printed after "#01=".
The previous error is printed after "#02=". Error information log can be stored up to 10 errors.
The oldest error information will be removed when the new error information is added.
Error message of the latest error number is displayed after "Last=#01".
(Example (TD-2130N): Check Media)
Error code
00 No Error
01 Check Media
02 Check Media
03 Communication Error
04 Memory Full
05 Close Cover
07 Database Record Problem
08 No Template Selected
09 Setting Wireless LAN Unsuccessful
0C Noncompliant USB Device
0D Charging Error
0E Recharge Battery
0F Mass Storage Operation Error
10 System Error 01
11 System Error 02
(4) Confirm that the tape is fed properly, printing is correct, and the tape is cut accurately.
If any fault is found, excite the troubleshooting referring to
TROUBLESHOOTING AND ERROR
(5) Pull up the release lever and confirm that the roll cover is opened and closed properly.
(6) Confirm that the Feed button works properly.
(7) Confirm that the Power button works properly.
(8) You can also check the following printer setting information;
Program Version
Printer Usage History
Paper Information
Printer Setting Information
List of Transferred Data
Network Setting Information
Error message
MESSAGE".
III - 52
Description
No error (Default)
Field error
Tape end error
Connection error
Memory full error
Open cover error
Database search error
No template error
WiFi error
USB host error
Battery error
Recharge error
Mass storage error
System error 01
System error 02
"CHAPTER IV