Access Control - Lanier 5222 Operator's Manual

Remote Maintenance by Telnet (mshell)

Access Control

Use the access command to view and configure access control.
Reference
Configuration
Parameter
control
mask
Notes:
6 - 10
msh> access
msh> access parameter address
•
The Access Control Address and the Access Control Mask are used to limit access to the
computer used for printing by denying access to users based on their IP address. If it is
not necessary to limit access, set the Access Control Mask to "0.0.0.0".
•
When the Access Control Address matches masked result of the IP address computer
attempting to print, print jobs from that IP address can be accepted by the Network
Interface Card.
•
For example, if you assign 192.168.15.16 as the Access Control Address to the Network
Interface Card, the combination of the Access Control Mask and the IP addresses that
can print are as follows. The XXX is a variable that means any number from 1 to 255 is
acceptable.
Configuration Method
Access Control Address
Access Control Mask
Access Control Mask
255. 0. 0. 0
255.255. 0. 0
255.255.255. 0
255.255.255.255
IP Addresses that can
Access the Printer
192.XXX.XXX.XXX
192.168.XXX.XXX
196.196. 15.XXX
192.168. 15. 16
Additional Functions