Printing Slows Down; Tray Linking Does Not Work - Lexmark MS810 User Manual

Troubleshooting

Printing slows down

Notes:
•
When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the
fuser.
•
The printer speed may be reduced when printing for long periods of time, or printing at elevated
temperatures.
Action
Step 1
a
Make sure the size of the paper loaded in the tray matches the
fuser type.
Note: Use a 110-volt fuser for printing on letter-size paper and
a 220-volt fuser for printing on A4‑size paper.
b
Resend the print job.
Does the print speed increase?
Step 2
a
Replace the fuser. For more information on installing the fuser,
see the instruction sheet that came with the part.
b
Resend the print job.
Does the print speed increase?

Tray linking does not work

Notes:
•
The trays can detect paper length.
•
The multipurpose feeder does not automatically detect the paper size. You must set the size from the
Paper Size/Type menu.
Action
Step 1
a
Open the trays, and then check if they contain paper of the
same size and type.
•
Check if the paper guides are in the correct positions for
the size of the paper loaded in each tray.
•
Check if the paper size indicators on the paper guides are
aligned with the paper size indicators on the tray.
b
Resend the print job.
Do the trays link correctly?
Yes No
The problem is Go to step 2.
solved.
The problem is Contact
solved. support.
Yes No
The problem is Go to step 2.
solved.
310
customer