Insert Staple Cartridge - Lexmark MS810 User Manual

Troubleshooting
Incompatible tray [x] [59]
Try one or more of the following:
•
Remove the specified tray.
•
From the printer control panel, select Continue to clear the message and continue printing without
using the specified tray. For non-touch-screen printer models, press
Incorrect paper size, open [paper source] [34]
Note: The paper source can be a tray or a feeder.
Try one or more of the following:
•
Load the correct size of paper in the paper source.
•
From the printer control panel, select Continue to clear the message and print using a different paper
source. For non‑touch‑screen printer models, press
•
Check the length and width guides of the paper source and make sure the paper is loaded properly.
•
Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
•
Make sure the paper size and type are specified in the Paper menu on the printer control panel.
•
Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size or MP Feeder
Size is set to Universal, then make sure the paper is large enough for the data being printed.
•
Cancel the print job.
Insert hole punch box
Insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear
the message. For non-touch-screen printer models, press

Insert staple cartridge

Try one or more of the following:
•
Insert a staple cartridge. For more information, see the instruction sheet that came with the supply.
•
Select Continue to clear the message and print without using the staple finisher. For non-touch-screen
printer models, press
Insert Tray [x]
Try one or more of the following:
•
Insert the specified tray into the printer.
•
Cancel the print job.
•
Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
to confirm.
to confirm.
to confirm.
to confirm.
286