Attaching the flexi flues to the spigot plate
The flexi flues need to be securely fixed to the engine spigot plate using the
clamps provided. To do this the spigot plate needs to be temporarily removed
from the engine—undo the two front screws holding it in place.
Top view showing flues clamped and the spigot plate in place on top of the engine
Flue clamp holding the flue onto the
spigot plate. Important: This also needs
to be screwed/riveted in place to stop any
movement of the flue.
Helpful tip
Once the flue is connected to the spigot
plate it will be free-hanging. To avoid
damage to the flue it's best to support this
within the cavity while waiting to install the
engine.
Tabs to hold the plate in place
Flue guide rail on either side of the engine.
The spigot plate slides in and out of this.
Ember Installation Guide: 12890-A 01-17 ¦ 19