Replacing Toner - Ricoh pro c901 Troubleshooting Manual

2. Adding Paper, Toner, Staples, Rings and Glue
• Do not crush or squeeze toner containers. Doing so can cause toner spillage, possibly resulting in
dirtying of skin, clothing, and floor, and accidental ingestion.
2 • Fault may occur if you use toner other than the recommended type.
• When adding toner, do not turn off the operation switch. If you do, settings will be lost.
• Always add toner when the machine instructs you.
• Do not use recycled toner. This will damage the machine.
• During toner adding, the toner container is rotating. Do not touch the toner container.
• If toner remains in the container, you cannot remove the container. Do not remove the container
forcibly.
• Store toner containers in a cool, dry place free from direct sunlight.
• Store toner on a flat surface.
• You can still make about 2,000 prints after the messages " Toner Cartridge is empty." and "
Replace the cartridge." appear cyclically, but replace toner soon to prevent poor print quality.
• You can check name of the required toner and the replacement procedure using the " Toner
Cartridge is empty." screen.
• You can change the toner containers during printing.
• If toner remains in the container, you cannot pull it out.
• Press [System Status] to check contact number where you can order supplies. See "Checking Machine
Status and Settings".
• You can add all four color toners in the same way.
• p.16 "Checking Machine Status and Settings"

Replacing Toner

This section describes how to replace toner.
• Do not shake the removed toner containers. The remaining toner might scatter.
• Do not install and remove the toner containers over and over. This could result in a toner leak.
72