Loading Paper Into The A3/11" × 17" Tray Unit - Ricoh pro c901 Troubleshooting Manual

2. Adding Paper, Toner, Staples, Rings and Glue
1. Carefully pull out the paper tray until it stops.
2
2. Square the paper, and then place it print side down.
• Whole tray pulled out
• Left half of the tray pulled out
3. Carefully push the paper tray fully in.
Loading Paper into the A3/11" × 17" Tray Unit
This section describes how to load paper in the A3/11" × 17" tray unit.
40
CAL066
CAL040
CAL041