Booklet Finisher Sr5020 - Ricoh pro c901 Troubleshooting Manual

Open the finisher
front cover.
Pull out the staple
unit.
Open the face plate
of the cartridge.
Push the cartridge
until it clicks.

Booklet Finisher SR5020

This section describes how to remove jammed staples from Booklet Finisher SR5020.
Turn knob R10
Pull out the cartridge
counterclockwise to lever.
rotate the staple unit.
Remove jammed Pull down the face
plate until it clicks.
staples.
Return the staple unit
to its original position,
and then close the
finisher front cover.
Removing Jammed Staples
Pull out the cartridge
gently.
Hold the lever,
and then push in
the cartridge.
CAL129
3
113