Konica Printer; Safety Guidance; Safety Precautions; General Safety Guidelines - Konica Minolta KM256 Manual

1 Safety Guidance

1.1 Safety precautions

Before using the printer, please read the following safety precautions to make sure the
safety of using the equipment.

1.2 General safety guidelines.

Please read installation instructions before the printer is connected to the power.
Please turn off the printer immediately for any of the following situations. Please
unplug the power cord of machine from the power outlet and call the local dealer:
Power cord or plug is damaged;
Liquid run into the printer;
Appear smoking or unusual flavor on the printer;
Printer drops or drying system breakdown;
Printer's built-leakage circuit breakers (ground fault leakage protection) repeat
trips;
The fuse is broken;
The printer is not running.
For any of the following situations, please turn off the printer and unplug the power
cord of machine from the power outlet.
Thunderstorm;
The electricity is off during printing.

1.3 Important safety guidelines

Don't place anything on the printer's platform and be careful not to spill liquid on the
printer;
The types of power source can be used only which is identified on the label of printer.
According to different countries and regions, 110V or 220V AC power source may be
preferred;
All devices are connected to a properly grounded outlet to avoid the equipments
switching between turning on and off are in the same circuit such as outlet and copier
or air conditioning system;
Avoid using the wall switch or automatic timer control socket;
Please make sure your computer system is far from potential sources of
electromagnetic interference, such as speaker or cordless phones;
1