Konica Minolta KM256 Manual page 33

As showing in the picture,the switch of media is in the front of the machine. Every switch is
controlled by the three section switch. When printing, open the two switch to"二", it will feed
automatically and collect the media printed. After printed, cut the media then open feeding button
to "一" it will collect the maintain media through motor reserve. Open the collection button to "一
" it will loosen the collecting media to process in the later period.
Media installation (H and C machine)
C12/C8/H8 penetration type feeding structure
Balance bar for
gear rack
This structure for all media and media no leaning
Printing platform
Media
Penetrate media bar
Double feeding bar
29
Printing platform
C12/C8/H8 position type feeding structure
Balance bar for
gear rack
This structure for normal media
Drag cloth bar
Media
Double feeding bar