Precautions When Using The Printer; Danger Of Electric Shock - Konica Minolta KM256 Manual

Don't use damaged or frayed power cord;
If you use additional power cord, remember that the total amperage of equipment
which is inserted attached power cord should not exceed the rating amperage of the
power source. Besides remember the total amperage of all equipments into the wall
should not exceed the rating amperage of wall socket;

1.4 Precautions when using the printer

Don't move the print head by hand when turning on the printer or you may damage
the printer;
Always using the power switch to turn off the printer, when the key is pressed, the
power will be cut off; before the power is cut off, do not unplug the printer plug or
data line;
Please make sure the printer head is in the initial position and make it fixed before
moving the printer.

1.5 Danger of electric shock

Drying system uses normal AC power. When using the system, do not
put your hand or other objects into it, otherwise it will result in body
Warnings!
injury or damage to the object.
There's two power cords on the printer. Please unplug these two power cords before
repairing the printer. The printer can only be connected to the grounded AC power outlet.
To avoid the danger of electric shock, please notice the following:
Don't attempt to remove drying or electrical control cabinet.
Don't remove or open any other closed system cover or plug.
Don't put any objects into the printer slot.
Blown fuse in the circuit may indicate failure of electric circuit in
Notice! system. Please call your local dealer and not attempt to replace the
fuse yourself.
2