Mounting the Access Point
Place the clamp bracket on the strand support cable (see
Figure
18). On each cable support bolt, ensure
Step 3
that one cable clamp is placed on each side of the support cable (see
Figure
20). Tighten the two M8
flange nuts to 13 to 15 in. lbs (17.6 to 20.3 Nm).
Figure 18
Clamp Bracket Attached to Cable Strand
1
Two cable clips, flat washer, and a M8 flange nut on each cable support bolt
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
31
78-18269-04