Assigning A Video Source To Input Channels; Sharing A Video Source - Roland V-800HD MK II Owner's Manual

Video Input/Output Settings

Assigning a Video Source to Input Channels

You can specify an assigned video source for each individual input channel. You can assign the following video sources.
Channel 1–4 Video input via an SDI IN connector or COMPOSITE IN connector
Channel 5–8
Video input via an RGB/COMPONENT IN connector or DVI-I/HDMI IN connector
Channel 9 Still picture
Channel 10 Still picture or monochrome picture (background color)
1.
Select the [MENU] button g "Input" g "Ch.1" through
"Ch.10."
2.
Use the [VALUE] knob to specify the video source to assign
to the channel (1 through 10).
Ch.1–Ch.4
Value Explanation
This inputs video via an SDI IN connector.
3G/HD/SD-SDI
The type of input signal (3G-SDI, HD-SDI, or SD-SDI) is
detected automatically.
Composite This inputs video via a COMPOSITE IN connector.
This shares the video source on the previous channel
among channels 1 through 4.
Shared Input For details, refer to the "Sharing a Video Source" column
on this page.
Composite Composite
* "Shared Input" can be set for channels 2–4.
SDI SDI
Ch.5–Ch.8
Shared
Input
Value Explanation
This inputs video via a DVI-I/HDMI IN connector.
* The displayed setting value differs depending on the
setting of the [SIGNAL] switch (p. 11).
DVI-D/HDMI
or
[SIGNAL] switch
DVI-A
Ch.1 Ch.2
RGB/Component This inputs video via an RGB/COMPONENT IN connector.
This shares the video source on the previous channel
among channels 5 through 8.
Shared Input For details, refer to the "Sharing a Video Source" column
on this page.
* "Shared Input" can be set for channels 6–8.
Ch.9
Value Explanation
This assigns a still image (p. 24).
Still Image
Ch.10
Value Explanation
This assigns a still image (p. 24).
Still Image
This assigns a monochrome picture (background color).
Background
4.
Press the [MENU] button to quit the menu.
16
Composite Composite
SDI SDI
Shared Shared
Input Input
Value
DVI-D DVI-D/HDMI
Ch.3 Ch.4
DVI-A DVI-A

Sharing a Video Source

You can share separate video sources among channels 1 through 4 or
among channels 5 through 8. Sharing a video source assigns a single
video source to two or more channels.
The only source that can be shared with several channels is the video
source from the immediately previous channel. For example, to share
the video on channel 1 with channels 2 through 4, you set the video
source for channels 2 through 4 to "Shared Input. "
Channel 1–4
Composite Composite
SDI SDI
Shared
Input
Ch.1 Ch.2
Channel 5–8
DVI-I/HDMI DVI-I/HDMI
RGB/ RGB/
Component Component
Shared
Input
Ch.5 Ch.6
Composite Composite
SDI SDI
Shared Shared
Input Input
Ch.3 Ch.4
DVI-I/HDMI DVI-I/HDMI
RGB/ RGB/
Component Component
Shared Shared
Input Input
Ch.7 Ch.8