Switch - Cisco IE 4000 Hardware Installation Manual

Switch Installation
Connecting to Power
Figure 12 Torquing the Power Connector Captive Screws
1 Power connector captive screws
8. Connect the other end of the positive wire to the positive terminal on the DC power source, and connect the other
end of the return wire to the return terminal on the DC power source.
When you are testing the switch, one power connection is sufficient. If you are installing the switch and are using a
second power source, repeat
Figure 13 on page 27
optional secondary power source.
1
Step 4 through Step 8
shows the completed DC-input wiring on a power connector for a primary power source and an
using the second power connector.
26